IB 45 Injection blow Molding Machine is one-step blow bottle equipment. It is used to make 5-500 ml plastic bottles. The machine output reached maximal 60,000 pieces bottles per day. Suitable for most thermoplastic resins such as PE, PP, PS and so on . Its products are widely used in medicine packing, the cosmetic packing of making up chemical industry, gifts & toys and so on.
    Zhangjiagang Lvhuan Machinery Co.,Ltd was established in 2001. It is located in Zhangjiagang City in the golden delta of the Lower Reaches of the Changjiang River in China.
IB45 Injection Blow Molding Machine
Including:1. Product counting conveyer              1 set
2. Mould temperature controller            2 set
3. Bottle Body Moulds (5 cavities)          1 set
1. The special features
1) Feature bottle neck is molded by means of hot runner system and high pressure injection. It makes the accuracy of mouth-neck and good thread, As well as sealing ability. The bottle''''''''s surface is sleek. No leftover bits and pieces are produced. It can save raw material. 
2) It adopts high efficiency and continuous production with the horizontal three-position swivel device, And It adopts the mould multiple cavities. Automatic manufacture, have no secondary pollution accord with requirement of sanitation. 
3)The machine using fame brand and high quality hydraulic、pneumatic and electrical elements, the  system  is of good performance and high reliability with computer control. 
4) Using  double proportional  hydraulic system, which makes the adjustment of hydraulic system handy and keeps system stable in performance.
5)The production cycle is about 13 seconds
2. Main Technical Parameters
IB45-3S INJECTION BLOW MOLDING MACHINE Main Technical Parameters
1. Dia. Of Screw: 45mm
2. Max .theoretical capacity: 227 cm3
3. Electric heating power of cylinder: 10 k w
4. Electric heating control section: 4 qty
5. clamping force 0f injection die: 450 KN
6. Clamping force 0f blow die: 60 KN
7. Opening distance of mould: 120mm
8. Idle time: 5 S
9. Max Mould size L *W: 530*390 mm
10. Min. mould thickness: 240 mm
11. Main motor power: 22 k w
12. Pressure of hydraulic system: 14Mpa
13. Working Pressure of comp air: 1.0 M Pa
14. Displacement of comp air: 0.5m3/h
15. Cooling water needed capacity:  5m3/h
16. Overall size L* W* H: 4100*1300*2350 mm
17. Machine weight: 6 T
18. Range of formability product: 15-800 ml
19. High of formability product: 165 mm
20. Diameter of formability bottle: 100mm
21. Total power: 35 k w

Cavity Number of One Mould and Volume of Bottle. (For Reference)
Volume*Cavity quantity: 15ml*10 piece, 20ml*10 piece, 40ml*8 piece, 60ml*7 piece, 100ml*6 piece, 140ml*5 piece, 200ml*4 piece
Zhangjiagang Lvhuan Machinery Co., LTD.
Address: The Development Zone of Tangqiao Town, Zhangjiagang City, Jiangsu Province, P.R.CHINA
Http://en.lvhuanjx.com
Email:xuelianghe@tom.com 
lvhuanjixie@163.com or lvhuanjx@hotmail.com
Tel:+86-512-5843 3638  5843 3438 
Fax:+86-512-58433438