IB Series Injection blow Molding Machine for Plastic bottles
Our company offers injection blow molding machine for 5ml~500ml bottles. The machine produces maximal 40,000pcs bottles per day. Suitable for greater part of thermoplastic resins such as PE, PP, PS and so on .its products are widely used in medicine packing, the cosmetic packing of making up chemical industry, gifts & toys and so on.
Our company acts on trading truly, making perfection, innovative improving, looking forward greatly. Stands domestic Injection-Blow technology to research and develop production on IB series Injection-Blow molding machine.

IB28 Injection Blow Molding Machine
Including:1. Product counting conveyer 1 set
2. Mould temperature controller 2 set
3. Bottle Body Moulds (5 cavities) 1 set
1. The special features
1).adopt six-pole motor, lower noise, energy-saved.
2).The clamping framework adopts single-crossbeam, so have much bigger space to place moulds and High-speed change mould.
3).The clamping framework adopt double tie-bar to protect, High efficient and much suitable for product location demand.
4).The large machines adopt the way of supply-oil crock at oil passage, so it is much more high-speed clamping, energy-saved and reliable for locking mechanism.
5).Special thick working platform is made of QT material, excellent mechanics function, difficult to transform.
2. PRODUCT FEATURES:
1).Excellent mechanical strength, impact -resisting.
2).Non-cracking bottle mouth and thread are of precise measurement, enabling100% close match with the bottle cap.
3).The weight of the product can be destined.
4).The measurement and thickness of the product can meet the requirement of the design without any deviation.
5).The surface of the bottle mouth and the body is good luster and smoothness.
6).No rough selvedge will occur at the mouth or bottom of the bottle products, which saves the cost of the raw material.
7).On the bottom of the bottle there is no joint seam, and the strength is improved.
8).The joint seam on the bottle body is smooth.
3. Main Technical Parameters
IB28-3S INJECTION BLOW MOLDING MACHINE Main Technical Parameters
1. Dia. Of Screw: 40mm
2. Max .theoretical capacity: 165 cm3
3. Electric heating power of cylinder: 6.5 k w
4. Electric heating control section: 4 qty
5. clamping force 0f injection die: 280 KN
6. Clamping force 0f blow die: 50 KN
7. Opening distance of mould: 120mm
8. Idle time: 4 S
9. Max Mould size L *W: 350*200mm
10. Min. mould thickness: 180 mm
11. Main motor power: 11 k w
12. Pressure of hydraulic system: 14Mpa
13. Working Pressure of comp air: 1.0 M Pa
14. Displacement of comp air: 0.3 m3/h
15. Cooling water needed capacity: 3 m3/h
16. Overall size L* W* H: 3400*1150*2300 mm
17. Machine weight: 4 T
18. Range of formability product: 15-800 ml
19. High of formability product: 165 mm
20. Diameter of formability bottle: 100mm
21. Total power: 20 k w
Cavity Number of One Mould And Volume of Bottle.(For Reference)
Product volume(ml) 8 15 20 40 60 80 100
Cavity quantity 6 6 6 5 4 3 3

Zhangjiagang Lvhuan Machinery Co., LTD.
Address: The Development Zone of Tangqiao Town, Zhangjiagang City, Jiangsu Province, P.R.CHINA
Http:// www.lvhuanjx.com
Email:xuelianghe@tom.com
lvhuanjixie@163.com
Tel:+86-512-5843 3638 5843 3438
Fax:+86-512-58433438